Pins for AXS Links
Pins for AXS Links
Poor shifting? There is a good change you have bent pins. It is not uncommon to find bent pins if your derailleur has been in a significant wreck.
The Madrone pins are made to replace the pivot pins of the parallelogram links on your AXS rear derailleur. The are made from 304 stainless steel and ground to extremely precise tolerances (+/- 0.02mm).
Compatibility: SRAM AXS 12 speed Eagle (GX, X01, and XX1). The kit includes 3 different pins (short, medium, and long), and the snap rings.
We do not recommend buying just these pins without the Madrone links. You will need the Madrone links and tools too. The reason is that the Madrone links and tools are designed to work together to make the rebuild easy.
The pins are interchangeable with the SRAM pins, but we do not advise to disassemble and reassemble a SRAM parallelogram without the Madrone links and tools because it is extremely difficult and you will likely damage your derailleur. In other words, don't get just the pins or you will end up with a headache!